| Function | It has the function of simulating the normal operation of the charging interface, which can realize the plug-in and pull-out operation of the charging interface, also has the programmable setting of test speed, test time and test times |
| Drive mode | The servo motor drives the plugging and unplugging movements and the rotating and liquid-wetting movements, and the auxiliary cylinder realizes the opening and closing of the switch interlocking mechanism. |
| Sample fixture and clamping method | Mechanical clamping, X/Y/Z three-dimensional adjustable clamp, adjustable clamping point position, universal clamp suitable for national standard, American standard, European standard AC/DC charging interfaces  |
| Automatic flip | Equipped with an automatic flipping mechanism at the charging gun clamp, which can be flipped 90º, and the flip holding time can be set arbitrarily within the range (0 ~ 600) s, which can achieve the testing of solution dip for IEC 62196-1:2022 clause 23.3.2. |
| Number of trials | 0~999999 times, can be preset, automatically stops when the count reaches the set value |
| Breaking capacity conduction time | 1-999.9s, can be preset (the standard requires that electrical contact should be maintained for no more than 4s and no less than 2s) |
| Plug and withdrawal rate | 0-10 times/min, can be preset (3.75 cycles/min, 7.5 strokes/min) |
| Test stroke | 0-150mm, can be preset (the distance between the test plug and the test socket is ≥50mm) |
| Test speed | 0-1100mm/s can be preset directly on the touch screen |
| Force value display | Equipped with a 50kg range force sensor, which can monitor force value in real time, form a force-time curve, display the maximum insertion force and extraction force, and display the current force value, force value range (0 ~ 500) N |
| Locking device | It has the function of automatically pressing the mechanical locking device to simulate normal operating conditions. |
| Solution tank | Equipped with one solution tank, which can accommodate IEC 62196-1:2022 clause 23.3.2 salt and dust water simulated solution, please note that the solution should be prepared by user |
| Solution dip requirements | The numbers of dip, dip time, drying time, plug-in and withdrawal times, and cycle times can be set |
| Load | External, can work with SN2217-480V250A |
| Detection function | When the load is connected, it can realize circuit break alarm and record the current times. |
| Safety protection | Ground protection, short circuit protection, overload protection |
